- [Wide Range of Application]:Mist maker can add a stunning mist effect to your pond, rockery or water tank.Perfects for use it in your fishtank,indoor or outdoor fountains,vase,birdbath,etc, and it will add a little magic to Halloween decorations.
- [Safety & Easy to Use]:Please Keep the item 3-4cm under the water level, and plug in the power supply to create mist. When the item is short of water during operation, it will be powered off automatically, safe and reliable.
- [Important Note]:Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime).
- [Easy to Operate]:Put in the water and the voltage is 24V, then the mist appears.No heat or chemicals used.
-
[Environmental Protection]:Our humidity fogger can provide mist.Aerosolized amount:≥400mL/H.
From the manufacturer
Specifications:
- 1. Mist Maker Size: 1.8inch/4.8cm diameter, 4.2cm tall
- 2. Material: Aluminum
- 3. Aerosolized amount:≥400mL/H
- 4. Disc:1.25cm.
- 5. Input: 110-250V, 50/60Hz
- 6. Output: DC 24V, 700mA
- 7. Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter
AGPtEK Aluminum Mist Maker Fog Maker is your good choose!
By using ultrasonic technology,this AGPtEK mist maker for indoor or outdoor use,which can add a stunning mist effect to your pond, rockery or water tank. Suitable for fountains, pond, rockery, fish tank, vase, birdbath and DIY humidifier for plants etc. Once you use them,they will create a magical atmosphere and filter the bad smell in water.
- (Note: the aluminum product will heat a bit of when using, so don’t used in fishtank while the plastic one is OK)


Points for attention:
1:Please Keep the water level higher then the nozzle 2~3cm/0.8~1.2inch to get the best atomization effect. but also cannot too high than the nozzle;
2:The Atomization Disc is Consumables and its service life is ≥3000 hours, so please keep the water clear and do not drop any essential oil in when using; (water quality deterioration may influence the lifetime).
3:When not using, please wipe clean with a cotton swab in time for avoid corroding product
4:Please ensure that the daily running time is less than 6 hours, otherwise the life of atomizing slice will be shorted.
5:It can only be used in tap water do not use Distilled Water.
6:In order to prevent water from spilling out when using, Please Put It Into a large or deep container. As a safety precaution, Please Do Not put any electric appliance near this item.

Ideal For Hollowen, Indoor Or Outdoor Fountains, Water Feature And Office Use



Compare with similar items
Product Description
Specifications:
1. Mist Maker Size: 4.6 cm diameter, 4.2cm tall
2. Material:aluminum
3. Aerosolized amount 300-400ml/H
4. Disc: 1.5cm.
5. Output Voltage: 24V DC.
6. With a US AC/DC adapter
7. Input: 110-250V, 50/60Hz
8. Output: DC 24V, 700mA
9. Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter Points for attention:
1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer.
2. Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.
3. Don’t touch the atomizing slice while the Mist Maker is working.
4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)
5. Please switch off the power before Movement or maintenance.
6. The atomizing slice is consumable,and its service life is ≥3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don’t need to use any detergent).Keep it clean. Note: 1.The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles.Please use higher container to prevent water from splashing out.
2.Please do not touch the top of atomization when use it, the frequency exceeds the body’s normal tolerance range, so you may have a similar feeling of electric shock if you touch it, but this is not electric leakage.
3.If you find that the new product has some water stains or dirt on it, please contact our customers service
Package included:
1 x Mist maker
1 x AC-DC adapter (US plug)
Product information
Product Dimensions 5.2 x 3.1 x 2.6 inches Item Weight 3.2 ounces Manufacturer AGPtek ASIN B00P91ZFPA Item model number Mist Maker Fogger Water Fountain Customer Reviews 3.8 out of 5 stars
Best Sellers Rank #56,380 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)
#11 in Water Garden & Pond FoggersIs Discontinued By Manufacturer No Warranty & Support
Feedback
Would you like to tell us about a lower price?
Pond Foggers
AGPTEK Aluminum Mini Mist Maker Fogger Water Fountain Pond Fog Machine Atomizer, Perfect for Halloween, Christmas and Other Holidays
$24.00
Availability: 20 in stock
- [Wide Range of Application]:Mist maker can add a stunning mist effect to your pond, rockery or water tank.Perfects for use it in your fishtank,indoor or outdoor fountains,vase,birdbath,etc, and it will add a little magic to Halloween decorations.
- [Safety & Easy to Use]:Please Keep the item 3-4cm under the water level, and plug in the power supply to create mist. When the item is short of water during operation, it will be powered off automatically, safe and reliable.
- [Important Note]:Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime).
- [Easy to Operate]:Put in the water and the voltage is 24V, then the mist appears.No heat or chemicals used.
- [Environmental Protection]:Our humidity fogger can provide mist.Aerosolized amount:≥400mL/H.
| Weight | 0.5 kg |
|---|











Reviews
There are no reviews yet.